RUS
  • eng
  • rus
Выбрать раздел
Миссиссога

Machine for repair of ball joints and steering tips SJR 3

machine for repair of ball joints and steering tips SJR 3
1 / 4
machine for repair of ball joints and steering tips SJR 3 - фото 1 machine for repair of ball joints and steering tips SJR 3 - фото 2 machine for repair of ball joints and steering tips SJR 3 - фото 3 machine for repair of ball joints and steering tips SJR 3 - фото 4
Обновлено: 20 мая 2020, 08:07 ID: 672
1 380 $/штука
A-PROFI STEEL, ООО Харьков, UA
на Флагма с 12 марта 2018
Стил Александр
менеджер

Описание

SJR 3 machine for repair of ball joints and steering tips is a guaranteed source of profit for your car service. With it, you can quickly and efficiently restore the suspension, steering device. The device has integrated furnace, and centering mechanism. This allows one operator to cope with repair steering tip.

When is a steering tip repair required?
Ball joints and steering tips wear out. As a result, the polymer insert located inside is erased. In its place a void forms. The reason for this are:

Excessive loads;
Penetration of dirt;
Movement on roads in poor condition.

The principle of using SJR technologySJR 3 machine
The molten polymer is fed into the interior into the cavity between the ball and the sleeve body through a drilled hole under pressure.
As it freezes, it forms a new, ideal in technical parameters, seal for the lever finger.
The restored unit is able to serve from 15,000 to 25,000 km, depending on the condition of the roads on which the car will ride;
In the event of the effects of new wear, repeated restoration of the ball joints is allowed.
After restoring ball joints and steering tips using SJR technology, car owners note a decrease in lubricant consumption

Advantages of the SJR 3
Automated lever clamp;
Innovative centering mechanism. Thanks to him, the master can cope with the repair of the part without outside help;
Integrated polymer melting system. A gas burner is needed only to extract the remnants of the old polymer from the detail. The new portion of fluoroplastic will be warmed up to the required temperature by the machine itself;
High piston pressure.

Package bundle
Extruder;
Control block;
Thermal sensor;
Bushings for centering the ball joints: 10 pcs.;
Washers for centering the ball joints: 5 pcs.;
Power cable;
Pneumatic equipment;
Pressure regulator;
Replaceable nozzles: 3 pcs .;
Fastening mechanism;
Centering mechanism;
Consumables polymer: 20 pcs .;
Gas-burner.

Наиболее свежая информация находится у владельца объявления.

Похожие объявления

2
Stone Bridge Cutting Machine
Цена
Цена по запросу
BE3000 is a powerful cutting machine for marble and granite slabs, used manually or automatically in workshops and factories. The movement of the bridge is synchronized by a rack and pinion connection on steel wheels located in the heads of the curtains and hardened by heat treatment. Consists...
+6 объявлений
7 мар
8
Sizing and Sorting Machine for Tiles
Sizing and Sorting Machine for Tiles - фото 1
Sizing and Sorting Machine for Tiles - фото 2
+4 фото
Sizing and Sorting Machine for Tiles - фото 3
Цена
Цена по запросу
Consists of three cars. At the beginning and end of the line there is a trimming machine, in the middle there is a pneumatic rotary machine, in the center there is a mechanical lathe. The line cutting precision is 2/10mm.
+6 объявлений
7 мар
4
Strip machine for cutting marble blocks with 80 strips
Strip machine for cutting marble blocks with 80 strips - фото 1
Strip machine for cutting marble blocks with 80 strips - фото 2
Strip machine for cutting marble blocks with 80 strips - фото 3
Цена
Цена по запросу
The multi saw is designed using the block lifting principle to ensure maximum performance when cutting marble. The machine provides a complete standard of measurement and cutting quality for marble slabs. The durable blade body allows each blade to support up to 12 tons. This body operates in a...
+6 объявлений
7 мар
Показать еще
A-PROFI STEEL, ООО Харьков, UA
Работает на Флагма с 12 марта 2018
Стил Александр
менеджер
Смотрите еще объявления в категории Автосервисное оборудование, прочее
Контакты
Представитель
Стил Александр
менеджер
Контакты
Скажите, что нашли объявление на Флагма
Правила безопасности: Не соглашайтесь на предоплату, если не уверены в надежности пользователя.
Написать сообщение
A-PROFI STEEL, ООО Стил Александр, менеджер
machine for repair of ball joints and steering tips SJR 3
1 380 $/штука ID: 672
Выбрать раздел
×