Выбрать раздел

Continuous fryer 400/1100/12

1 / 9
Continuous fryer 400/1100/12 - фото 1 Continuous fryer 400/1100/12 - фото 2 Continuous fryer 400/1100/12 - фото 3 Continuous fryer 400/1100/12 - фото 4 Continuous fryer 400/1100/12 - фото 5 Continuous fryer 400/1100/12 - фото 6 Continuous fryer 400/1100/12 - фото 7 Continuous fryer 400/1100/12 - фото 8
Добавлено: 24 ноября 2023, 05:04 ID: 3010
8 590 $/штука
Условия поставки: EXW Малацки
на Флагма с 6 сентября 2018
Ftp Engineering
project Manager


The universal conveyor fryer allows you to fry a wide range of products such as: nuts, chips, chicken wings, chicken nuggets, patties, pies, schnitzels, french fries, snacks and other products - the range of products can be easily expanded with additional modules.

In terms of its functions and capabilities, it is comparable to professional industrial fryers, while the additional modules allow you to fry almost any product!

Basic version

The basic version consists of a working bath made out of food-grade stainless steel, a body with thermal insulation and an external decorative casing made out of polished stainless steel, inside which a working conveyor with a fine-mesh cloth made out of stainless steel intended for use in the food industry is installed. The unit is equipped with a heating system with individual thermostats for each heating element and a system for smooth control of the conveyor speed with a wide setting range: from a few seconds up to an hour. The control system is installed on the body of the working bath for convenient and quick adjustment of the operating parameters. The electrical panel with heating elements can be easily dismantled for quick and easy cleaning of the unit, due to the system of brackets and connectors.

Under the working area there is a “cold zone”. Particles of the product, dry or wet breading/liaison, that get into the frying zone, pass through a fine-mesh sieve directly into the “cold zone”, below the level of heating elements. Inside the cold zone, the frying process stops, which slows down the process of oil deterioration, its carbonization and increases its service life.

The walls of the case are equipped with 15 mm thermal insulation with a heat-reflecting effect.

The basic version of the fryer can be used to fry: Nuts - hazelnuts, walnuts, pecans, Brazilian nuts, peanuts, pistachios, macadamia, cashews, almonds as well as chestnuts. It can also be used to fry products with a low air or water content, that do not float in oil.


• Stainless steel heating elements with powerful direct heating
• Fast and highly efficient heating to reduce oil carbonation in the heating sections!
• Possibility of individual thermoregulation of each heating section!
• Fine-mesh conveyor mesh made of food-grade stainless steel - mesh size 7*55 mm.
• Safety thermostats on each heating element
• Thermal insulation of the working bath to reduce heat loss and for safe operation and maintenance
• Guaranteed 100% oil discharge, discharge needle valve located at the lowest hydraulic point
• Controls located directly on the body of the fryer
• The presence of a special "cold zone" for the separated pieces of the product, which, falling into it, burn less and slow down the process of oil spoilage
• Immersion thermometer for monitoring the current oil temperature
• Maximum heating temperature - up to 200 degrees C *** (*** - depending on the type of oil)
• Low oil volume due to reduced working bath depth, significant oil savings even with immersion fryer module
• Feed tray with a perforated section to dispose of excess crumbs/liaison before loading into the fryer, reducing oil carbonation and extending oil life
• Modular fryer system with a large number of additional equipment options

Technical data

Conveyor belt width – 400 mm,
The length of the working area for frying – 1100 mm
Working area - 0.44 m2
Heating power - 12 kW
Oil volume – 75 L

Additional modules

• A second upper (pressure) conveyor belt - for frying products with a higher air or water content, which will forcibly submerge such products in oil for an even result.
• Paddle conveyor - for frying light and thin products that stay on the surface of oil during the frying process. The specially curved windmill shaped blades gently force the slices of food beneath the oil level and move them along the working area, allowing for complete and even frying.
• Stainless steel worktable for the fryer

Наиболее свежая информация находится у владельца объявления.

Похожие объявления

Tabletop Continuous Electric Fryer
Tabletop Continuous Electric Fryer - фото 1
Tabletop Continuous Electric Fryer - фото 2
Tabletop Continuous Electric Fryer - фото 3
Цена по запросу
Compact tabletop fryer provides continuous frying of products by immersion in oil. In its functions and capabilities, it's comparable to an industrial conveyor deep fryer. The fryer is a working tank (bathtub), in which a universal conveyor with a food belt is placed and a guaranteed immersing...
+19 объявлений
11 авг 2023
Compact Snack Continuous Baking Oven
Compact Snack Continuous Baking Oven - фото 1
Compact Snack Continuous Baking Oven - фото 2
+1 фото
Compact Snack Continuous Baking Oven - фото 3
Цена по запросу
Our continuous oven is designed for excellent baking results on the smallest of base measurements. It’s a universal device that bakes perfectly and helps your snack business create faster service and delicious variety. We can also offer you the solution of compact falafel production line that...
+19 объявлений
11 авг 2023
Показать еще
Работает на Флагма с 6 сентября 2018
Ftp Engineering
project Manager
Смотрите еще объявления в категории Фритюрницы профессиональные
Свяжитесь с компанией
Ftp Engineering
Project Manager
По телефонам
Скажите, что нашли объявление на Флагма
Правила безопасности: Не соглашайтесь на предоплату, если не уверены в надежности пользователя.
Написать сообщение
FTP ENGINEERING, S.R.O. Ftp Engineering, Project Manager
Continuous fryer 400/1100/12
8 590 $/штука ID: 3010
Выбрать раздел